What should a 3PL rate card say so you can check the invoice?

Rate cards7 min read

A rate card should give, for every fee you can be billed, a price, the unit it applies to and the dates it applies from. It should also state the terms that are not prices: free hours, peak dates, a monthly minimum, a markup cap and any fee that will not be charged. Each field is read by a specific audit rule, so a field left out means that check runs on less, or not at all.

The fields a rate card needs, and the check that reads each

The rule numbers match the list of checks on the home page and the "Rule N" badge on each finding. Dollar figures in the right-hand column come from our sample report: a synthetic six-month invoice set for a fictional brand, audited month July 2026. They show how a field is used, not what any 3PL charges.

Rate card fieldWhat to write in itRule that reads itWhat you cannot check without it
Unit price for each fee: pick, pack, storage, receiving, returns, account feeThe price, the unit written out (per order, per additional item, per pallet/month, per hour) and the dates it appliesR4, rates above contractWhether a line was billed at the agreed rate. In our sample report the card sets $0.20 per additional item; 606 lines were billed at $0.28, which is $93.84 over. One storage line of 15 units was billed at $68.00 against $42.00 per pallet/month, which is $390.00 over. R4 also needs the invoice line to show its unit rate; when a line shows an amount but no unit rate, the report lists the check as not checked.
Several prices for one fee, such as a list of box pricesEach named price with its dates. A multi-box order can be the sum of two or three of themR4, rates above contractWhich of several agreed prices applies to a line. A card that lists one price for a fee that has several makes every line at another price look like an overcharge.
Every fee the contract allows, named as the invoice prints itFee names, including the surcharges you agreed toR3, new charge types; R2, recurring surcharges not in the quoteWhether a fee is in the quote at all. In our sample report, "Inventory Movement" ($177.00) and "Fulfillment Adjustment Surcharge" ($285.00 a month, $855.00 over three months) are not in the card. Without the card, R3 can compare a fee with earlier invoices and nothing else; R2 needs three months of invoices either way, and the card tells it which fees were agreed.
Fees the contract says will not be chargedThe fee type or service name, as it appears on the invoiceR3, new charge typesWhether a fee is out of contract on the invoice where it appears. Without the entry it is judged like any other new fee, against earlier invoices.
Free allowancesQuantity and period, for example free receiving hours each monthR7, free receiving hours billed without a creditWhether the free hours were credited. In our sample report 6.5 receiving hours a month are free, 12.5 hours were billed at $40.00 an hour with no credit, and $260.00 is still to be credited. Without the field, R7 can do no more than compare hours with earlier months.
Peak or holiday surcharge datesStart date, end date and a label for each windowR8, peak fees outside the windowWhether a peak fee is dated inside the window. In our sample report the window is 2026-11-01 to 2026-12-31 and $420.00 of peak fees were billed on 2026-07-18. Without dates, R8 still finds peak fees, but it says the card sets no dates and lowers its confidence. A card that lists the peak surcharge as always allowed switches the check off.
Monthly minimumThe amount, and what counts toward itR10, unused monthly minimumWhether you paid for capacity you did not use. R10 is a savings finding, not a dispute, because the 3PL is within the contract. Our sample card sets no minimum, so the sample report has no finding for this check.
Markup cap on shippingThe cap, as a percentage over the carrier's own chargeR12, shipping markupWhether postage was marked up beyond the cap. The cap is not enough: the invoice lines also have to carry what the carrier charged for each label. In our sample report they do not, so the report lists the check under "What we could not check" and compares the average price per parcel with earlier months.
Shipping rate sheetsFor each service: zones, weight tiers, how fuel is applied (a percentage, per pound or included) and the date of the quoteR15, labels above your zone and weight ratesWhether each label was priced by the sheet. In our sample report the card has no shipping table, so 805 labels were not checked. A sheet that says fuel is not included leaves a floor, not a price, and R15 makes no claim on such labels.
Dispute windowDays from the invoice date within which a charge can be disputedNo rule reads itThe date to act by. A finding that goes in the letter shows "Dispute by" as the earliest invoice date on it plus this window; without the field the report says the window is not set.

Why the name, the unit and the date matter as much as the price

A check can compare just what it can match. R3 and R2 decide whether a fee is in the quote by matching the fee type on the invoice line to a fee type on the card, so the card should call each fee what the invoice calls it. A card that says "handling" while the invoice says "Inventory Movement" leaves you arguing about vocabulary instead of arithmetic.

R4 multiplies, so the unit matters. A price of $0.20 means nothing until the card says per what. The card behind our sample report writes "$0.20 per additional item" and "$42.00 per pallet/month", and the findings quote those units back to the 3PL.

R4 applies a price by the date on the invoice line. When a contract is revised in the middle of a month, a card that gives each price a start date lets the old and the new rate be compared with the lines they belong to. A card with one undated price cannot tell a late increase from an error.

What to ask your 3PL for

  • The current rate card as a dated document, with a version or quote date, and the same document each time you ask. Keep the copy you signed.
  • A price for every fee you have been billed, with the unit written out: per order, per additional item, per pallet per month, per hour.
  • The date each price starts, and the date it ends if it ends.
  • The fee names exactly as they appear on the invoice, including surcharges you are allowed to be billed, and a plain statement of any fee that will not be charged.
  • Free allowances as a quantity and a period, such as receiving hours per month, and whether they appear on the invoice as a credit line.
  • Peak or holiday surcharge dates, and the surcharge amount.
  • The monthly minimum, and what counts toward it.
  • For shipping: a rate sheet per service with zones and weight tiers, how fuel is applied, and the markup cap over the carrier charge if there is one.
  • How many days from the invoice date you have to dispute a charge.

What a rate card does not check

Duplicate charges (R1), missing promised credits (R5), cost per order (R9), card surcharges (R11), fee spikes (R13) and orders picked or shipped twice (R14) do not read the rate card. They work from the invoice lines, earlier invoices and, for some, the order count or the payment method. R5 also needs a list of credits you were promised. Keep that list yourself: the date, the amount, the reason and a link to the message.

When a line disagrees with the card

A complete card turns a suspicion into a line you can quote: the price on the card, the price on the invoice and the difference. How to put that in front of the person who can issue the credit is covered in how to dispute a 3PL invoice, and the patterns these fields are meant to catch are in the billing errors that show up most often. The sample report shows each rate finding with the card price, the billed price and the difference side by side.

Sources

  • WareAudit sample report: a synthetic six-month invoice set for a fictional brand, audited month July 2026. Every dollar figure, date and quoted card term above is taken from it.
  • WareAudit list of checks, read 2026-10-30: the checks, their rule numbers and what each rule does.
  • Which field each rule reads: the WareAudit rule definitions for R2, R3, R4, R7, R8, R10, R12 and R15, as implemented on 2026-10-30.

Not legal or accounting advice.

Have us run these checks on your invoices.

Send three invoices and get the findings in dollars, with the lines behind each one. The first audit is free.

Get a free audit