ShipBob invoice audit: how to check a ShipBob invoice for billing errors

To check a ShipBob invoice for errors, get the invoice lines as data, group them by fee type and shipment, and compare them with your contract and with your previous months. WareAudit does that comparison for you: it reads your ShipBob billing data (or an invoice file), runs the checks that data allows, and returns a report with a dispute letter you can send to ShipBob. For the manual version, follow our step-by-step guide to auditing a ShipBob invoice.

How to check a ShipBob invoice for errors by hand

  1. 1Pull the lines, not the PDF. ShipBob's billing API lists invoices for a date range and the transactions on each invoice. Each transaction has a fee name, an amount, a charge date, a fulfillment center, and a reference id and its type, for example Shipment (ShipBob billing guide, read October 30, 2026).
  2. 2Group the lines by fee type, so the same charge is counted once under one name.
  3. 3Compare with the three months before. Most billing errors show up as a difference between months.
  4. 4Compare with your contract: quoted rates, peak windows, monthly minimums and credits you were promised.
  5. 5Write one message per invoice, with each disputed line, its date, its amount and one sentence on why it is wrong.

Each step is worked through with examples in How to audit a ShipBob invoice, line by line.

ShipBob billing errors WareAudit checks

WareAudit numbers its checks as rules, and the report shows the rule number on every finding. The rules below run on the data ShipBob's billing API sends. The right-hand column comes from our sample report, which is built from a synthetic invoice corpus and is not ShipBob data, so every amount there is "in our sample report".

Rules that ask for a credit (they go into the dispute letter)

A finding the report marks as preliminary is shown in the report but stays out of the letter.

RuleWhat it checks on a ShipBob invoiceExample in our sample report
Rule 1: Duplicate chargesThe same fee billed more than once on the same shipment or return, on the same date, for the same amount. The repeats are disputed; the original charge is not."Pack Fee" billed twice on 4 orders: $3.00 in repeat charges.
Rule 2: Recurring surcharges not in the quoteA surcharge that is not in your rate card and returns at a steady amount for three months in a row."Fulfillment Adjustment Surcharge", about $285.00 a month for 3 months: $855.00.
Rule 3: New charge typesA fee name that is not on your earlier invoices and not in your rate card. With under two earlier months a new-charge finding is preliminary and stays out of the letter.New charge type "Inventory Movement": $177.00.
Rule 5: Missing promised creditsA credit your 3PL promised, which you record in your account, that never arrives as a negative line on a later invoice.No finding in our sample report for that month.
Rule 8: Peak fees outside the windowA peak surcharge dated outside the peak window in your rate card. With no window on the card the finding is marked medium confidence instead of high.Peak surcharge dated 2026-07-18, outside the window 2026-11-01 to 2026-12-31: $420.00.

Rules that flag, with no demand in the letter

RuleWhat it checks on a ShipBob invoiceExample in our sample report
Rule 10: Unused monthly minimumsBillable activity below the monthly minimum in your contract, if your contract has one and your rate card says so. A saving to know about, not a claim against ShipBob.No finding in our sample report.
Rule 11: Credit card surcharges and what paying by ACH would saveCard-processing surcharge lines on the invoice, with a yearly total and what paying by ACH would save. ShipBob's billing guide lists CreditCardProcessingFee as an invoice type (read October 30, 2026).An estimate of $4,389.84 a year, at 3% of the total of an invoice paid by card; it is an estimate, not an invoice line. On ShipBob billing API data this estimate is not produced, because the data does not say how an invoice was paid; the report totals the card-surcharge lines the invoice carries.
Rule 13: Fee spikes over baselineA fee type far above its own usual month, scaled by order volume where order counts are known. Preliminary: a reason to ask for a line-by-line explanation, never a line in the letter.No finding in our sample report.

Sample report, synthetic data. Open the full sample report

We found $2,198.84 in your 3PL invoices for 2026-07

$2,198.84
to dispute with your 3PL
$2,134.63
potential savings
7
errors found
12
checks run

The totals in this sample also count Rules 4, 7, 9 and 11, which do not run on ShipBob billing API data.

Sample report, synthetic data. Open the full sample report

Rule 2: Recurring surcharge: "Fulfillment Adjustment Surcharge" 3 months in a row

"Fulfillment Adjustment Surcharge" was billed every month from 2026-05 to 2026-07, about $285.00 a month, and it is not in your rate card. $855.00 in total. Each row is one of these charges, month by month.

Charges by month (2026-05, 2026-06, 2026-07)

DateInvoice and lineFeeQuantity and rateExpectedBilledDifference
2026-05-28NW-2026-05 · line 402867Fulfillment Adjustment Surcharge1 × $285.00$0.00$285.00$285.00
2026-06-28NW-2026-06 · line 502966Fulfillment Adjustment Surcharge1 × $285.00$0.00$285.00$285.00
2026-07-28NW-2026-07 · line 603035Fulfillment Adjustment Surcharge1 × $285.00$0.00$285.00$285.00

Paragraph of the dispute letter

The charge "Fulfillment Adjustment Surcharge" of approximately $285.00 a month has been billed every month from 2026-05 through 2026-07 (3 months, $855.00 in total). It is not part of our rate card and was never quoted. Please identify its contractual basis or credit $855.00.

What does not run on ShipBob billing data

ShipBob's billing guide lists an amount for each line, but no quantity, unit rate, order count or payment method (read October 30, 2026). Checks that need those do not run on it: a rate above your contract (Rule 4), free receiving hours billed without a credit (Rule 7), cost per order (Rule 9), and whether a card surcharge was billed to an invoice you pay by ACH (the dispute part of Rule 11). Orders picked or shipped twice (Rule 14) and labels above your zone and weight rates (Rule 15) need units, weights and destinations that the billing data does not carry either.

The markup over the carrier's price (Rule 12) needs the carrier's cost for each label, which ShipBob billing lines do not carry. Where at least two earlier months of shipping lines are on file, the report compares your average price per parcel with those months instead, as a low-confidence recommendation, and says so under "What we could not check".

Every report lists the checks it could not run under "What we could not check". Which checks run depends on what your invoice data includes, and a file whose lines carry quantities and rates runs more of them.

How WareAudit connects to ShipBob

WareAudit reads from your ShipBob account and never writes to it. There are three ways in.

  • No connection at all: the free audit below. Send your last three invoices by email; a CSV export is enough and no token is needed.
  • A ShipBob API token: in your WareAudit account, open Connect your data, choose ShipBob (API token) under "Or connect with a token", and paste a ShipBob Personal Access Token with the billing_read scope, which ShipBob's billing guide asks for. ShipBob's authentication page says to generate the token under Integrations > API Tokens in your ShipBob dashboard; the billing guide names Settings > API > Personal Access Tokens, so follow the path your dashboard shows (both pages read October 30, 2026). The authentication page describes a personal access token as having full account access (read October 30, 2026). WareAudit uses it to read and never to write. ShipBob's authentication page also says personal access tokens do not expire, so you can revoke this one in ShipBob after the audit. Our security page explains how tokens are handled: encrypted at rest, with just the last four characters shown.
  • An invoice file: upload the invoice export as a CSV file in the same step, if you would rather not issue a token. CSV is a full path, with the same rules and the same report format; which rules run depends on the columns in your file.

Connect your data then has four steps:

  1. 1Invoices for the last three months. Three months give the checks a baseline, because most billing errors are visible as a difference between months.
  2. 2Your rate card. It tells the audit what you were quoted: peak windows, minimums, and which charges are in your contract.
  3. 3Credits your 3PL promised. This is the one input we cannot pull from your invoices; the audit then checks every later invoice for the credit.
  4. 4Run the audit. Once the connection is in place, the run takes under a minute for most brands, in the background, with progress on the dashboard.

What you get

  • A report for each month. In our sample report the summary reads "We found $2,198.84 in your 3PL invoices for 2026-07": $2,198.84 to dispute, $2,134.63 in potential savings, 7 errors found, 12 checks run. Our sample was built from a file with quantities, unit rates and a payment method, so its totals also count Rules 4, 7, 9 and 11, which do not run on ShipBob billing API data. Every finding shows its rule number, its confidence and the invoice lines behind it. In your dashboard it opens with "Open the report and letter"; PDF and Excel downloads sit beside it.
  • A dispute letter. Each finding that asks for money, except preliminary ones, comes with a paragraph for your 3PL that cites the invoice lines and asks for a credit as a discount on your next invoice. In our sample report one reads "Please identify its contractual basis or credit $855.00." You send the letter, as written or edited; WareAudit never writes to ShipBob itself.
  • A way to follow each dispute. Mark a finding as sent, credit promised, partly credited, credited, declined or withdrawn, and the credit lines on later invoices are matched against what was promised.
  • A report even when nothing is wrong. You get the report anyway, showing which checks ran, which came back clean and which it could not run.

Price

Prices are in US dollars. A one-off audit covers three months of bills; the subscriptions run the audit every month.

PlanPriceOrder volumeIncludes
One-off audit$299 onceThree months of bills, one reportNo subscription; same checks as the plans; same dispute letter; promised-credit registry
Starter$149 per month, or $1,599 per yearUp to 3,000 orders a monthOne 3PL connection; monthly automatic audit; report and dispute letter; promised-credit registry
Growth$299 per month, or $3,199 per yearUp to 15,000 orders a monthMulti-warehouse; promised-credit registry; unlimited share links for your 3PL
Scale$599 per month, or $6,499 per yearUp to 50,000 orders a monthEverything in Growth; weekly invoices from several warehouses; one report for the whole month; promised-credit registry

If you subscribe within 30 days of paying for the one-off audit, up to $299 is taken off the initial subscription payment.

Common questions

Do you need write access to our ShipBob account?

No. WareAudit reads from your 3PL account and never writes to it. If you would rather not issue a token, you can upload invoice exports as CSV instead.

What happens if you find nothing?

You get the report anyway, showing which checks ran and which it could not run. A clean invoice is a real result: none of the checks that ran found a billing error, and the report lists the checks it could not run.

Do you take a percentage of what you recover?

Never. The price is fixed and named upfront.

Get a free audit of your last three invoices

No calls, no demo. Send your last three ShipBob invoices (a CSV export is enough, no token required) and a line-by-line report comes back within 48 hours. Revoke any token you do give us afterwards.

Get a free audit

Not legal or accounting advice.