ShipHero invoice audit: how to check a ShipHero invoice for billing errors

WareAudit checks the invoices your 3PL bills you through ShipHero 3PL Billing, not a subscription to ShipHero software. To check one for errors, get the bill as a CSV export of its charges rather than the PDF, then compare each charge with your contract and with your previous bills. WareAudit does that comparison for you: it reads the CSV export, runs the checks the data allows, and returns a report with a dispute letter you can send to your 3PL.

How to check a ShipHero invoice for errors by hand

  1. 1Get the charges, not the PDF. ShipHero's help center says that flat-rate shipment fees do not appear on the 3PL Billing dashboard view, which is the 3PL's tool, and that they are visible in the CSV export of the bill, so the CSV is where to confirm them (ShipHero help, "Troubleshooting 3PL Billing in ShipHero", updated October 21, 2026). ShipHero's developer docs say that when a 3PL submits a bill through the API, an email goes to the client with the bill attached (ShipHero developer guide to 3PL billing, read October 30, 2026). If you cannot open the bill yourself, ask your 3PL for the CSV export of it.
  2. 2Group the charges by fee type. ShipHero's 3PL Billing sorts fees into recurring, receiving, storage, shipment, return and ad hoc (ShipHero help, "Overview: 3PL Billing Fees", updated June 12, 2026). Add up each group per bill, so each charge is counted once, under one name.
  3. 3Compare with the three bills before. Many billing errors show up as a difference between periods.
  4. 4Compare with your contract. In ShipHero's 3PL Billing a client has one billing profile per warehouse (ShipHero help, "Overview: 3PL Billing in ShipHero", updated June 10, 2026). If you use several warehouses, compare each warehouse's charges with the rates quoted for it.
  5. 5Look at adjustment lines. ShipHero's carrier reconciliation adds the difference between a label's quoted cost and the carrier's later charge to the customer's next bill, shown as label reconciliations (ShipHero help, "Overview: Carrier Reconciliation in 3PL Billing", updated October 23, 2026). An adjustment line is expected on some bills; ask your 3PL for the tracking numbers behind it.
  6. 6Write one message per invoice, with each disputed charge, its date, its amount and one sentence on why it is wrong.

Each step is worked through with examples in How to audit a ShipHero invoice, line by line.

ShipHero billing errors WareAudit checks

WareAudit numbers its checks as rules, and the report shows the rule number on every finding. The right-hand column comes from our sample report, which is built from a synthetic invoice corpus and is not ShipHero data, so every amount there is "in our sample report". Rules marked "Needs" depend on something you add besides the export: your earlier bills, or your rate card.

Rules that ask for a credit (a finding goes into the dispute letter unless it is marked preliminary)

RuleWhat it checks on a ShipHero billExample in our sample report
Rule 1: Duplicate chargesThe same fee billed more than once on the same order, on the same date, for the same amount. Different SKUs, tracking numbers and box package numbers count as different events, not duplicates. The repeats are disputed; the original charge is not."Pack Fee" billed twice on 4 orders: $3.00 in repeat charges.
Rule 2: Recurring surcharges not in the quoteA surcharge that is not in your rate card and returns at a steady amount for three months in a row. Needs earlier bills."Fulfillment Adjustment Surcharge", about $285.00 a month for 3 months: $855.00.
Rule 3: New charge typesA fee name that is not on your earlier bills and not in your rate card. Needs earlier bills or a rate card. With fewer than two earlier months the finding is preliminary.New charge type "Inventory Movement": $177.00.
Rule 4: Rates above contractA charge whose unit rate is above the rate in your rate card. In the ShipHero charges exports WareAudit reads, each line carries a quantity and a unit rate, so this check can run on lines that show a rate. Needs a rate card.Storage (pallet): $42.00 on the rate card, billed at $68.00 on 1 line: $390.00. Pick (additional): $0.20 on the rate card, billed at $0.28 on 606 lines: $93.84.
Rule 5: Missing promised creditsA credit your 3PL promised, which you record in your account, that never arrives as a negative line on a later bill.Nothing found in our sample report.
Rule 7: Free receiving hours billed without a creditReceiving billed by the hour when your contract makes some hours free, with no matching credit. Needs receiving lines billed by the hour and free hours in your rate card (see below). Without a credit for free hours anywhere on your bills the finding is preliminary.6.5 free hours of 12.5 hours billed at $40.00 an hour, no credit: $260.00.
Rule 8: Peak fees outside the windowA peak surcharge dated outside the peak window in your rate card. With no window on the card the finding is marked medium confidence instead of high.Peak surcharge dated 2026-07-18, outside the window 2026-11-01 to 2026-12-31: $420.00.
Rule 14: Orders picked or shipped twiceAn order with two shipments that together carry more units than were ordered, or one SKU picked as a new item in two parcels on the same day. Reads the units ordered and shipped that the ShipHero charges exports WareAudit reads carry for each shipment.Not checked in our sample report: its lines do not show units per shipment.
Rule 15: Labels above your zone and weight ratesA shipping label priced above your 3PL's rate sheets for its zone, weight and service. The zone comes from the destination country and the three-character postal prefix; where the prefix alone does not fix the zone, the label is priced at the highest zone on the sheet. A label is disputed when its price is above the highest price among the sheets that match. Needs your shipping rate sheets in your rate card.Not checked in our sample report: its rate card has no shipping table.

Rules that flag, with no demand in the letter

RuleWhat it checks on a ShipHero billExample in our sample report
Rule 9: Cost per order trendYour cost per order for the period against a usual earlier period, split into its largest parts. The order count comes from the order numbers on the charge lines. A metric to know about, not a claim against your 3PL.$15.15 per order against $12.95 in a usual earlier month (+17%), across 805 orders.
Rule 10: Unused monthly minimumsBillable activity below the monthly minimum in your contract, if your rate card has one. A saving to know about, not a claim.Nothing found in our sample report.
Rule 11: Credit card surcharges and what paying by ACH would saveCard-processing surcharge lines on the bill, with a yearly total and what paying by ACH would save.An estimate of $4,389.84 a year, at 3% of the total of an invoice paid by card; it is an estimate, not an invoice line.
Rule 12: Shipping markupThe average price per parcel against your own history, a reason to ask your 3PL about a rise. Low confidence: a rise can come from zones or weights.In our sample report this check ran in part, against history.
Rule 13: Fee spikes over baselineA fee type far above its own usual month, scaled by order volume where order counts are known. Preliminary: a reason to ask for a line-by-line explanation, never a line in the letter.Nothing found in our sample report.

Sample report, synthetic data. Open the full sample report

We found $2,198.84 in your 3PL invoices for 2026-07

$2,198.84
to dispute with your 3PL
$2,134.63
potential savings
7
errors found
12
checks run

Sample report, synthetic data. Open the full sample report

Rule 4: Rate above contract: Storage (pallet)

Your rate card sets $42.00 per pallet/month for Storage (pallet). One line was billed at $68.00 instead; the overcharge comes to $390.00. Each row is one line: what your rate card says it should cost, what you were billed, and the difference.

Lines billed at a different price than your rate card ($42.00 per pallet/month)

DateInvoice and lineFeeQuantity and rateExpectedBilledDifference
2026-07-05NW-2026-07 · line 603026Storage - Pallet15 × $68.00$630.00$1,020.00$390.00

Paragraph of the dispute letter

Our rate card specifies $42.00 per pallet/month for "Storage - Pallet". Invoice NW-2026-07 bills $68.00 across 1 line covering 15 units on 2026-07-05, an overcharge of $390.00. Please correct the rate going forward and credit the difference.

What does not run on ShipHero data

The ShipHero exports WareAudit reads do not carry everything a check might want, and a check without its input does not run and does not pretend to.

  • Markup over the carrier's price (Rule 12). In the ShipHero exports WareAudit reads there is no field for what the carrier charged for a label, so the average price per parcel is compared with your history instead.
  • Card surcharge billed to a bill you pay by ACH (the dispute part of Rule 11). The ShipHero exports WareAudit reads do not say how a bill is paid. Card surcharge lines are still found and totaled, but the card-versus-ACH dispute and the 3% estimate need a payment method that the file does not carry.
  • Free receiving hours (Rule 7). ShipHero's help center describes receiving fees per purchase order and per item, and labor charges from work orders and POs as ad hoc charges (ShipHero help, "Overview: 3PL Billing Fees", updated June 12, 2026). The check runs when a bill has receiving lines billed by the hour with hours and a rate, and your rate card names free hours; when hourly receiving lines have no hours or rate it reports "not checked"; when the bill has no hourly receiving lines there is nothing to read.
  • Rates, minimums and label rates (Rules 4, 10 and 15) compare charges with your contract, so they stay silent until your rate card has the rates, the minimum or the shipping sheets.
  • A flat export without units, weights or destinations. In the flat ShipHero export WareAudit reads, each line has an item, a description, a total and an order number, with no units per shipment and no label weights or destinations, so Rules 14 and 15 do not run on it.

Every report shows how many checks ran and, under "What we could not check", lists the ones that found lines they could not read. A check that needs your earlier bills or rate card stays silent until you add them. Which checks run depends on what your data includes.

What WareAudit reads from a ShipHero export

From the ShipHero charges export WareAudit reads the bill number and the period it covers; for each charge the type, fee name, description, quantity, unit rate and total; the order number, SKU and carrier; and for each shipment the units ordered and shipped, weight, dimensions, method, destination country and a three-character postal prefix (ZIP3 in the US, FSA in Canada). Shopper names and street addresses are dropped from the audit data at import. The original file you upload is kept encrypted and deleted after 13 months (see Privacy); for an Excel workbook, what is kept is a copy of the columns the checks read. The ShipHero exports WareAudit reads carry no currency, so you choose the invoice currency when you upload it.

How WareAudit connects to ShipHero

WareAudit reads from your ShipHero data and never writes to it. There are four ways in.

  • No connection at all: the free audit below. Send your last three bills by email; a CSV export is enough and no token is needed.
  • A file: in your WareAudit account, open Connect your data and use Upload a file. Choose the format "ShipHero export (CSV or Excel)", the invoice period (YYYY-MM) and the invoice currency, and add the file. One CSV file can be up to 80 MB and 400,000 invoice lines, and an Excel (.xlsx) file up to 25 MB; a larger export goes up as weekly or per-warehouse files. Upload the export as it came from ShipHero: a file opened and saved again in Excel can have its dates turned into numbers, and WareAudit refuses it with a message instead of guessing.
  • Forward by email: under "Or forward bills by email" you get an address of your own. Forward the email from your 3PL with the bill attached as CSV or Excel (.xlsx); a ZIP of CSV files works too. A PDF bill cannot be checked line by line.
  • A ShipHero API token: under "Or connect with a token", choose "ShipHero (public API)" and paste a token. ShipHero's developer docs say that asking a client for a ShipHero username and password is neither ideal nor secure, and its scopes page says that tokens from the /auth/token endpoint do not enforce scopes and keep the full API access of their user (read October 30, 2026). WareAudit uses the token to read and never to write, encrypts it at rest and shows just its last four characters. ShipHero also says the access token expires every 28 days; when it does, Connections shows "needs a new token" and you paste a new one. The bill lines come from the export file that ShipHero links to each bill, read the same way as an uploaded file. ShipHero describes the bills query in its guide for 3PLs, so a token may not be able to read bills on every ShipHero account; if yours cannot, use the file or email route. Our security page explains token handling.

Connect your data lists four numbered steps; steps 1 to 3 are what you provide and step 4 runs the audit:

  1. 1Invoices for the last three months. Three months give the checks a baseline: without history the recurring-surcharge and spike checks stay silent.
  2. 2Your rate card. It tells the audit what you were quoted: rates, peak windows, minimums, free receiving hours and shipping rate sheets. The rate card is entered as JSON text in the field "Rate card JSON". When your bills carry unit rates, the page drafts a rate card from them ("Use these rates"). Those rates come from your invoices, not from your contract, so compare them with the contract before you run the audit: if your 3PL overcharges an item on every line, a rate card built from those rates will not flag it.
  3. 3Credits your 3PL promised. This is the one input we cannot pull from your invoices; the audit then checks every later bill for the credit.
  4. 4The audit run. Once the connection is in place, the run takes under a minute for most brands, in the background, with progress on the dashboard.

What you get

  • A report for each month. In our sample report the summary reads "We found $2,198.84 in your 3PL invoices for 2026-07": $2,198.84 to dispute, $2,134.63 in potential savings, 7 errors found, 12 checks run. Every finding shows its rule number, its confidence and the invoice lines behind it. In your dashboard it opens with "Open the report and letter"; PDF and Excel downloads sit beside it.
  • A dispute letter. Each finding that goes into the letter comes with a paragraph for your 3PL that cites the invoice lines and asks for a credit as a discount on your next invoice; a finding marked preliminary stays in the report and is not in the letter. In our sample report one reads "Please identify its contractual basis or credit $855.00." You send the letter, as written or edited; WareAudit never writes to your 3PL itself.
  • A way to follow each dispute. Mark a finding as sent, credit promised, partly credited, credited, declined or withdrawn, and the credit lines on later bills are matched against what was promised.
  • A report when no check finds a problem. You get the report anyway, showing what was checked and which checks could not run.

Price

Prices are in US dollars. A one-off audit covers three months of bills; the subscriptions run the audit every month.

PlanPriceOrder volumeIncludes
One-off audit$299 onceThree months of bills, one reportNo subscription; same checks as the plans; same dispute letter; promised-credit registry
Starter$149 per month, or $1,599 per yearUp to 3,000 orders a monthOne 3PL connection; monthly automatic audit; report and dispute letter; promised-credit registry
Growth$299 per month, or $3,199 per yearUp to 15,000 orders a monthMulti-warehouse; promised-credit registry; unlimited share links for your 3PL
Scale$599 per month, or $6,499 per yearUp to 50,000 orders a monthEverything in Growth; weekly invoices from several warehouses; one report for the whole month; promised-credit registry

If you subscribe within 30 days of paying for the one-off audit, up to $299 is taken off the initial subscription payment. The price is fixed and named upfront: we never take a percentage of what you recover.

Common questions

Do you need write access to our ShipHero account?

No. WareAudit reads from your 3PL data and never writes to it. If you would rather not issue a token, you can upload the ShipHero export as a file or forward the bill by email instead.

Which ShipHero file should I upload?

The CSV export of the bill, which has one line per charge. If you cannot open the bill, ask your 3PL for that export. A PDF cannot be checked line by line.

What happens if you find nothing?

You get the report anyway, showing what was checked and which checks could not run. A clean report means none of the checks that could run found a problem; checks that need your rate card or earlier bills stay silent until you add them.

Do you take a percentage of what you recover?

Never. The price is fixed and named upfront.

Get a free audit of your last three invoices

No calls, no demo. Send your last three ShipHero bills (a CSV export is enough, no token required) and a line-by-line report comes back within 48 hours. If you have your rate card or quote, send it too: without it the rate checks stay silent. Revoke any token you do give us afterwards.

Get a free audit

Not legal or accounting advice.