How to audit a Flexport fulfillment invoice
Flexport7 min read
Flexport Fulfillment, the former Deliverr, invoices every two weeks, publishes its storage rates, its $5,000 monthly minimum and its 3% card fee, and lets you download each invoice as a PDF summary and as a CSV with one row per charge. That makes the audit concrete: most of the figures you need to hold the invoice against are on Flexport's own help pages, and the CSV carries the order, SKU and date references the checks need.
How Flexport bills
Flexport's billing cycle is every two weeks and invoices are due upon receipt. They sit on the Billing page of the Flexport portal. Each one can be downloaded two ways: a PDF that groups charges by category, and a CSV that lists every charge on its own row. On the PDF, credits and clawbacks appear after the subtotal. Audit from the CSV; use the PDF to check that the category totals and the credits agree with it.
The agreement behind the service is still titled the Deliverr Terms of Service for Distribution and Fulfillment Services, effective 2025-05-01, and names Deliverr, Inc. as the contracting party; the help center calls the service Flexport Fulfillment or Flexport Omni-Channel Fulfillment. Check which name is on your invoice and your contract so that a dispute letter cites the right one.
Published figures to hold the invoice against
These are the figures on Flexport's help center as of 2026-11-02. Your own pick, pack and shipping rates are not public: they are in the rate card you download from the billing tab of the portal, and that document is the one to compare the OUTBOUND rows against.
| Charge | Published figure | Where it is stated |
|---|---|---|
| Standard storage, January to September | $0.81 per cubic foot per 30 days | Pricing Overview, updated 2026-09-28 |
| Standard storage, October to December | $2.40 per cubic foot per 30 days | Pricing Overview |
| Storage minimum | $0.10 per DSKU per day (raised from $0.01 in the 2026 repricing) | Pricing Overview; 2026 Pricing FAQs |
| Long-term storage, units older than 365 days | $6.90 per cubic foot per 30 days, minimum $0.15 per unit per 30 days | Pricing Overview |
| Monthly minimum | $5,000 fulfillment spend per month for all accounts from 2026-01-01; the shortfall is billed on the next month's invoice | Monthly Minimum Fee article |
| Card, debit and PayPal payments | 3% processing fee; 4% for international PayPal; ACH carries no fee | Pricing Overview |
| Receiving | Standard inbound receiving is included in the base rate; floor-loaded containers without pallets are charged separately | Pricing Overview |
| Peak fulfillment surcharges | Charged separately as applicable; the amount is not on the page | Pricing Overview |
| Returns | An inspection fee per unit on every item in a return, plus the return label; the per-unit rate is not on the page | Pricing Overview |
| New direct-to-consumer rates | In effect since 2026-02-05; the former 5% marketplace markup was replaced by marketplace-specific rate cards | 2026 Pricing FAQs |
The CSV, column by column
Flexport documents the line-by-line CSV in a help article with a sample file. Every row carries Invoice Number, Charge Type (STORAGE, OUTBOUND or INBOUND), Amount, Charge Description and Charge Date. The rest of the columns depend on the charge type:
- STORAGE rows: DSKU, MSKU, QTY, Length, Width, Height, Cubic Feet and Category. This is enough to recompute cubic feet times the seasonal rate for each SKU.
- OUTBOUND rows: Order ID, Placed on, SKU, Shipping weight in pounds, Service Level and Line Item ID, with Marketplace, Marketplace Order Id and Billed Weight where they apply. Order ID is what makes the duplicate and double-shipment checks possible.
- INBOUND rows: Shipment ID, Transaction ID, Shipping Plan Name and Created. Receiving is included in the base rate, so INBOUND rows should be the exceptions: floor-loaded unloading, prep, labels, pallet or case handling.
What to check, in order
- 1Storage by season. For each STORAGE row, multiply Cubic Feet by $0.81 for January to September or $2.40 for October to December and compare with Amount. The published rates are per 30 days and the invoice covers two weeks, and the help pages do not say how the two-week share is computed, so ask your account team for the arithmetic before you dispute a storage row. An invoice period that straddles 30 September needs both rates. This step is manual.
- 2The storage minimum. A SKU with very little volume is billed at $0.10 per DSKU per day instead of the cubic rate. A SKU that carries both a cubic charge and a minimum charge for the same days is worth a question; so is a minimum billed for more days than the invoice covers.
- 3Long-term storage. Rows in the long-term category should correspond to units that have been in the network for more than 365 days. Compare with your inventory aging report; a long-term line against stock you received this year goes in the letter.
- 4The $5,000 minimum. If your fulfillment spend for a month was below $5,000, the shortfall appears on the next invoice. Check that the shortfall equals $5,000 minus that month's fulfillment spend, and that no shortfall is billed for a month that cleared the threshold; this check is manual. R10 in our reports looks at the other side of the same figure: spend below the minimum you entered in the rate card is shown as savings to pursue by moving volume or renegotiating the minimum, not as a dispute, because the 3PL is within the contract.
- 5The card fee. A 3% line on an invoice you paid by ACH is R11. If you pay by card, the same check tells you what ACH would save.
- 6Duplicates. Sort OUTBOUND rows by Order ID. The same charge for one Order ID and one Line Item ID, on the same date and for the same amount, twice, is R1. Two shipping labels for one order are a question for Flexport; R14, orders shipped twice, needs the units ordered and shipped on each row, which this CSV does not carry.
- 7Weight. Compare Billed Weight with Shipping weight and with the weight in your store export, and query any package billed heavier than it shipped. This step is manual: R15 in our reports compares each label with the zone and weight table in your contract, and the CSV carries no destination to place a label in a zone.
- 8Credits and clawbacks. Every credit you were promised should appear after the subtotal on the PDF. A missing one is R5. Ask about any clawback you cannot tie to a credit you know of.
- 9Peak surcharges. Flexport says peak fulfillment surcharges are charged separately as applicable but does not publish the window on the pricing page. Compare the Charge Date on any peak row with the peak window in your contract or in what Flexport told you in writing. Outside the window is R8.
Disputes and claims
Flexport's help center says the progress of an invoice dispute and the resulting credit or refund are shown in the Billing section of the portal; that article names no deadline. Section 4.1 of the Deliverr Terms of Service says that the Payment Terms and Conditions on flexport.com govern your obligation to pay the invoices, and those terms require you to contest or dispute any freight or accessorial charges in writing by email within 30 days of receiving the invoice that includes them. Whether that clause reaches fulfillment charges is for your account team to confirm in writing; until it is confirmed, treat 30 days from receipt as the deadline and keep the answer with the contract. Do not confuse invoice disputes with order claims: order claims close 30 days after the Promised Delivery Date, 35 days during the peak period from 15 November to 15 January, and are filed from the order page.
Running it with WareAudit
WareAudit has no Flexport connection; the Flexport CSV is uploaded as a file, up to 25 MB, about 70,000 rows. Upload the CSV for three consecutive billing periods so the history checks have a baseline. The report runs the checks the columns support, cites the rows behind each finding and drafts the letter; checks the data cannot support, such as R14 and R15 on this export, are listed as not run, and the steps marked manual above stay with you. The sample report shows the output and the checks list has every rule. 3PL storage fees explained covers the storage arithmetic in more depth. Not legal or accounting advice.
Sources
- Flexport help center, "Flexport Omni-Channel Fulfillment Pricing Overview", updated 2026-09-28: storage rates by season, storage minimum, long-term storage, card and PayPal fees, receiving, peak and returns wording. Read 2026-11-02.
- Flexport help center, "Monthly Minimum Fee": $5,000 monthly minimum fulfillment spend from 2026-01-01 and how the shortfall is billed. Read 2026-11-02.
- Flexport help center, "2026 Flexport Fulfillment Pricing FAQs": new direct-to-consumer rates from 2026-02-05, the storage minimum rising from $0.01 to $0.10, marketplace rate cards. Read 2026-11-02.
- Flexport help center, "Frequently Asked Questions: Regular and Unpaid Invoices": billing every two weeks, due upon receipt, invoices on the Billing page. Read 2026-11-02.
- Flexport help center, "How do I view details about my invoices?": PDF summary and CSV download, credits and clawbacks after the subtotal. Read 2026-11-02.
- Flexport help center, "Explaining the CSV Line by Line Invoice", updated 2026-06-12: column list by charge type. Read 2026-11-02.
- Flexport help center, "Where can I find details about my invoice disputes and associated credits/refunds", updated 2024-07-09, and "Order Claims Policy Guidelines", 2026-10-05. Read 2026-11-02.
- Deliverr Terms of Service for Distribution and Fulfillment Services, effective 2025-05-01, on flexport.com: section 4.1 refers payment obligations to the Payment Terms and Conditions on flexport.com. Read 2026-11-02.
- Flexport Payment Terms and Conditions, flexport.com/terms-and-conditions/payment-terms-and-conditions: freight or accessorial charges must be contested in writing by email within 30 days of receipt of the invoice that includes them. Read 2026-11-02.
- The WareAudit checks named in this article are on the checks list; CSV limits from the FAQ on the home page, as of 2026-11-02.